High Efficiency Nano Wet Grinding Horizontal Bead Mill

The NT-V rod type nano grinder adopts a cyclic sanding process or multiple sanding processes to increase production capacity and optimize product particle size distribution. A little bit of control function can ensure the replicability of the product and save costs. The large-sized rotor combined with a cylindrical gap separator allows this type of equipment to use small particle beads of different materials.

Send Inquiry +86 18051935350

Details of nano ceramicrod pin sand mill

High speed circulating rod nano grinder NTV series circulating sand grinding nano grinder
Suitable fineness: 2um-30nm
Grinding size: ≥ 0.05
This model is flexible to use, easy to clean, simple to maintain, has high sanding efficiency, large output, low energy consumption, and simple control.

Technical parameter of pin type nano grinding mill

Model	Experimental level			Mass production grade
Model	NT-0.3L	NT-0.6L	NT-1L	NT-V6	NT-V10	NT-V30	NT-V60	NT-V150	NT-V300
Magnification factor[l]	-	-	0.08	0.2	0.5	2	4	8
Sand grinding chamber capacity[l]	0.6	0.6	1	6	10	30	60	150	300
Good sanding batch[l]	0.3-1	1-2	2-10	100-600	100-500	500-2000	>2000	>4000	>7000
Flow rate[kg/h]	10-50	100-300	180-380	40-200	100-500	500-2500	1000-6000	2000-1500	5000-20000
Power[kw]	0.75	2.2	3.7	15	22	45	75	160-200	315

Brown pigments (various oxides)

Before sanding

After sanding: the dispersion rate is only 0.6

Metal

Before sanding

After sanding

Design Philosophy - Six Skills to Benefit You
Specialty 1 can achieve high flow circulation sand grinding
The energy of sand grinding is concentrated, and all materials are ground in the sand grinding zone, resulting in a narrow particle size distribution of the obtained materials; The slurry in the mixing tank and disperser circulates at a large flow rate, so the slurry can circulate dozens of times in a short time and process materials in large quantities.

Particle size distribution

Can be continuously sandblasted and dispersed

Compared to traditional mills, it can achieve a concentrated particle size distribution even at the same average particle size.It can achieve automatic cyclic sanding.Setting the parameters for cyclic sanding can achieve automatic cyclic sanding without the need for manual intervention.

Over time, dispersion will enable your product to reach the target granularity. Low temperature sanding can be achieved. Shorten the retention time of the slurry in the grinding chamber and effectively suppress temperature rise. Low temperature sand grinding can be achieved through the cooling of circulating cooling water.

Simple configuration

The operation mode of traditional grinding machines
1. Difficult to control particle size and insufficient dispersion;
2. The particle size distribution is often wide;
3. Unable to control the temperature of the material;
4. During high flow and high-speed operation, the grinding medium is prone to accumulate on one side of the chamber and block the discharge port.

Special Feature 2: High Energy Sand Grinding
Uniform energy distribution

Special feature 3 supports tiny grinding beads
Use a dynamic separation screen to achieve stable separation of small grinding media and slurry.

Specialty 4: structurally similar
The structural principles of small and large machines are similar

Special Feature 5: Good Cooling Effect
There is a specially designed cooling structure inside the sanding chamber

Special feature 6: The liquid receiving part can be made of various materials
We can customize material solutions according to user requirements.
The discharge area is large, which is 2-4 times that of disc and turbine machines. The material has good passability and is not easy to block the machine. It has outstanding advantages in producing expandable materials. The cooling and heat exchange effect is good. The cooling area of the barrel, rotor, and discharge device is 1.3-1.5 times that of disc and turbine equipment, effectively controlling the temperature rise of materials.

Application area

NTV series high-efficiency rod nano grinder - well produced and widely used
Applied to: water-soluble products, oil soluble products, pollution-free products, alcohol products, suitable for machinery and engineering in different industries and applications.
Provide equipment and engineering services for the following industries in the Sand Grinding and Dispersion Division
● Lithium battery positive/negative/separator alumina
● Ceramic ink, ceramic pigment, nano color paste
● Calcium carbonate, zirconium silicate, zirconium oxide cosmetics
● Printing Ink Inkjet Ink Thermal Transfer Inkjet
● Aluminum hydroxide pesticide suspension agent aluminum silver paste
● Polishing agent (CMP) liquid crystal display (LCD)
● Electronic paste magnetic materials
● Silicon dioxide graphene food additive
● Aerospace nanomaterials, magnetic materials, conductive slurries
● Biopharmaceutical cell lysis leather plastic materials

Prev： None

Next：NT-X series full-ceramic turbine nano grinding mill

◇◇Related products◇◇